Home
 
  ARP Technologies Cisco TrainingSpecial OffersOur Cisco coursesCisco training scheduleAbout us

CompanyNewsCareersContact UsClient LoginFranšais

At a Glance

Course Code: ICND2
Duration: 5
Price: 3495 *
Cisco Learning Credits: 35 *
Type: Public or Private
Skill Level: Intermediate
* Plus applicable taxes

 

Interconnecting Cisco Networking Devices Part 2 v3.0(ICND2)


           
The Interconnecting Cisco Networking Devices, Part 2 (ICND2) v3.0 course is a five-day, instructor-led course that teaches students how to perform basic troubleshooting steps in enterprise branch office networks, preparing students for Cisco CCNA certification.
Key additions to this lates revision include understanding of Quality of Service (QoS) elements and their applicability, how virtualized and cloud services will interact and impact enterprise networks, along with an overview of network programmability and the related controller types and tools that are available to support software defined network architectures.
A full suite of labs has been developed using the virtual IOS environment with flexible topologies that reinforce concepts with hands-on, guided discovery and challenge labs that align to each lesson module.
Special note

This course can be combined with ICND1 v3.0 for the CCNA Boot Camp (CCNA Boot Camp).

Back to top
Prerequisites
           
The knowledge and skills that a student must have before attending this course are as follows:
•Understand network fundamentals
•Implement local area networks
•Implement Internet connectivity
•Manage network devices
•Secure network devices
•Implement basic IPv6 connectivity
Back to top
Audience

This course is intended for individuals seeking the Cisco CCNA Routing and Switching certification. The course is also appropriate for pre-sales and post-sales network engineers involved in the installation and support of enterprise branch office networks.

Back to top
Skills taught
           
Upon successful completion of this course, students should be able to meet these overall objectives:


• Install, operate, and troubleshoot a medium-sized network, including connecting to a WAN and implementing network security


• Describe the effects of new technologies such as IoE, IoT, IWAN, and SDN on network evolution

• Operate a medium-sized LAN with multiple switches, supporting VLANs, trunking, and spanning tree


• Troubleshoot IP connectivity


• Describe how to configure and troubleshoot EIGRP in an IPv4 environment, and configure EIGRP for IPv6


• Configure and troubleshoot OSPF in an IPv4 environment and configure OSPF for IPv6

 
• Define characteristics, functions, and components of a WAN


• Describe how device management can be implemented using the traditional and intelligent ways

Back to top
Interconnecting Cisco Networking Devices Part 2 v3.0 (ICND2)
           
Module 1: Implementing Scalable Medium-Sized Networks
•Lesson 1: Troubleshooting VLAN Connectivity
•Lesson 2: Building Redundant Switched Topologies
•Lesson 3: Improving Redundant Switched Topologies with EtherChannel
•Lesson 4: Understanding Layer 3 Redundancy
Module 2: Troubleshooting Basic Connectivity
•Lesson 1: Troubleshooting IPv4 Network Connectivity
•Lesson 2: Troubleshooting IPv6 Network Connectivity
Module 3: Implementing an EIGRP-Based Solution
•Lesson 1: Implementing EIGRP
•Lesson 2: Implementing EIGRP for IPv6
•Lesson 3: Troubleshooting EIGRP
Module 4: Summary Challenge
•Lesson 1: Implementing and Troubleshooting Scalable Medium-Sized Network-1
•Lesson 2: Implementing and Troubleshooting Scalable Medium-Sized Network-2
Module 5: Implement a Scalable OSPF-Based Solution
•Lesson 1: Understanding OSFP
•Lesson 2: Implementing Multiarea OSPF IPv4
•Lesson 3: Implementing OSPFv3 for IPv6
•Lesson 4: Troubleshooting Multiarea OSPF
Module 6: Wide-Area Networks
•Lesson 1: Understanding WAN Technologies
•Lesson 2: Understanding Point-to-Point Protocols
•Lesson 3: Configuring GRE Tunnels
•Lesson 4: Configuring Single-Homed EBGP
Module 7: Network Device Management
•Lesson 1: Implementing Basic Network Device Management and Mitigating Threats at Access Layer
•Lesson 2: Evolution of Intelligent Networks
•Lesson 3: Introducing QoS
Module 8: Summary Challenge
•Lesson 1: Implementing and Troubleshooting Scalable Multiarea Network-1
•Lesson 2: Implementing and Troubleshooting Scalable Multiarea Network-2
Lab Outline
•Lab 1: Troubleshoot VLANs and Trunks
•Lab 2: Configure Root Bridge and Analyze STP Topology
•Lab 3: Troubleshoot STP Issues
•Lab 4: Configure and Verify EtherChannel
•Lab 5: Configure and Verify HSRP
•Lab 6: Troubleshoot HSRP
•Lab 7: Use Troubleshooting Tools
•Lab 8: Configure and Verify IPv4 Extended Access Lists
•Lab 9: Troubleshoot IPv4 Network Connectivity
•Lab 10: Configure and Verify IPv6 Extended Access Lists
•Lab 11: Troubleshoot IPv6 Network Connectivity
•Lab 12: Configure and Verify EIGRP
•Lab 13: Configure and Verify EIGRP for IPv6
•Lab 14: Troubleshoot EIGRP
•Lab 15: Configure and Verify Single-Area OSPF
•Lab 16: Configure and Verify Multiarea OSPF
•Lab 17: Configure and Verify OSPFv3
•Lab 18: Troubleshoot Multiarea OSPF
•Lab 19: Configure Serial Interface and PPP
•Lab 20: Configure and Verify MLP
•Lab 21: Configure and Verify PPPoE Client
•Lab 22: Configure and Verify GRE Tunnel
•Lab 23: Configure and Verify Single Homed EBGP
•Lab 24: Configure External Authentication Using RADIUS and TACACS+
•Lab 25: Configure SNMP
ack to top

 

  IBM Partner
 
 
CompanyNewsOur CoursesScheduleAbout usCareersContact
ARP Technologies, All rights reserved - CALL US NOW : 1 866 450 6469 - CANADA US EUROPE
CISCO Certified Training : Your Expert Cisco, Call Center, VOIP Training Leader | Legal Notices Site created by : Distantia

 
Book your next course - click here ╗