Interconnecting Cisco Networking Devices Part 2 (ICND2)

Ce cours est donné aux dates et endroits suivants:

This course focuses on providing the skills and knowledge necessary to install, operate, and troubleshoot a small to medium-size branch office Enterprise network, including configuring several switches and routers, connecting to a WLAN, and implementing network security.  This course is intended for network technicians, network administrators, and technical support personnel.  ICND1 is strongly recommended as a prerequisite.  However, with a reasonable understanding of networking and experience in the IT world, a student could successfully go directly to ICND2 with extra effort.

This course can be combined with ICND1 for the CCNA Boot Camp.

 ICND1 or equivalent work experience.

Network technicians, network administrators, technical support personnel, anyone pursuing CCNA Certification.

Upon completing this course, you will be able to:
• Review how to configure and troubleshoot a small network
• Expand the switched network from a small LAN to a medium-sized LAN with multiple switches, supporting VLANs, trunking and spanning tree
• Describe routing concepts as they apply to a medium-sized network and discuss considerations when implementing routing on the network
• Configure, verify and troubleshoot OSPF
• Configure, verify and troubleshoot EIGRP
• Determine how to apply ACLs based on network requirements and to configure, verify and troubleshoot ACLs on a medium-sized network
• Describe when to use NAT or PAT on a medium-sized network and configure NAT or PAT on routers
• Identify and implement the appropriate WAN technology based on network requirements

Module 1:  Small Network Implementation

• Lesson 1:  Introducing the Review Lab

Module 2:  Medium-Sized Switched Network Construction

• Lesson 1:  Implementing VLANs and Trunks
• Lesson 2:  Improving Performanca with Spanning Tree
• Lesson 3:  Routing Between VLANs
• Lesson 4:  Securing the Expanded Network
• Lesson 5:  Troubleshooting Switched Networks

Module 3:  Medium-Sized Routing Operations

• Lesson 1:  Reviewing Routing Operations
• Lesson 2:  Implementing VLSM

Module 4:  Single-Area OSPF Implementation

• Lesson 1:  Implementing OSPF
• Troubleshooting OSPF

Module 5:  EIGRP Implementation

• Lesson 1:  Implementing EIGRP
• Lesson 2:  Troubleshooting EIGRP

Module 6:  Access Control Lists

• Lesson 1:  Introducing ACL Operation
• Lesson 2:  Configuring and Troubleshooting ACLs

Module 7:  Address Space Management

• Lesson 1:  Scaling the Network with NAT and PAT
• Lesson 2:  Transitioning to IPv6

Module 8:  LAN Extension into a WAN

• Lesson 1:  Introducing VPN Solutions
• Lesson 2:  Establishing a Point-to-Point WAN Connection with PPP
• Lesson 3:  Establishing a WAN Connection with Frame Relay
• Lesson 4:  Troubleshooting Frame Relay WANS

Labs:

• Implementing a Small Network (Review Lab)
• Configuring Expanded Switched Networks
• Troubleshooting Switched Networks
• Implementing OSPF
• Troubleshooting OSPF
• Implementing EIGRP
• Troubleshooting EIGRP
• Implementing and Troubleshooting ACLs
• Configuring NAT and PAT
• Implementing IPv6
• Establishing a Frame Relay WAN
• Troubleshooting Frame Relay WANs